College

We appreciate your visit to ASME containers installed in enclosed spaces on vehicles shall be constructed for at least a design pressure A 50 psi B 100 psi C 150. This page offers clear insights and highlights the essential aspects of the topic. Our goal is to provide a helpful and engaging learning experience. Explore the content and find the answers you need!

ASME containers installed in enclosed spaces on vehicles shall be constructed for at least a _______ design pressure.

A. 50 psi
B. 100 psi
C. 150 psi
D. 200 psi

Answer :

Final answer:

ASME containers installed in enclosed spaces on vehicles are typically designed to withstand a minimum design pressure of at least 150 psi, according to common practice and safety standards. The actual required pressure may vary and should be confirmed with the latest ASME codes or a professional engineer.

Explanation:

The question pertains to the minimum design pressure for ASME (American Society of Mechanical Engineers) containers installed in enclosed spaces on vehicles.

While the exact design pressure requirement can depend on specific regulations and standards that may be updated periodically, typically for safety reasons, containers are designed to withstand significantly higher pressures than they would normally encounter during use.

As per the ASME Boiler and Pressure Vessel Code, which governs the design and construction of pressure vessels, a common design pressure for many applications is at least 150 psi.

However, it is essential to check the latest ASME codes or consult with a professional engineer to get the most current and applicable requirements for your specific application or jurisdiction.

Design pressures are chosen to provide a margin of safety over the maximum expected operating pressure.

Any container meant for high-pressure gases like the example given, stating that a cylinder may fail at 400 atmospheres if designed with a safety factor of 2, suggests the containers are typically constructed to withstand pressures many times higher than normal operating levels.

Thanks for taking the time to read ASME containers installed in enclosed spaces on vehicles shall be constructed for at least a design pressure A 50 psi B 100 psi C 150. We hope the insights shared have been valuable and enhanced your understanding of the topic. Don�t hesitate to browse our website for more informative and engaging content!

Rewritten by : Barada